Melemo - Joinet

Bafani ba thepa & balekane

Joinet e na le tšebelisano ea nako e telele le e tebileng le leruo la 500 le likhoebo tse etellang pele indastering joalo ka Canon, Panasonic, Jabil joalo-joalo. Lihlahisoa tsa eona li 'nile tsa sebelisoa haholo Inthaneteng ea lintho, ntlo e bohlale, mochini o hloekisang metsi o bohlale, lisebelisoa tse bohlale tsa kichineng, tsamaiso ea bophelo bo ka sebelisoang le maemo a mang a ts'ebeliso, e shebaneng le IOT ho etsa hore ntho e' ngoe le e 'ngoe e be bohlale haholoanyane. 'Me lits'ebeletso tsa rona tse ikhethileng li ratoa haholo ke likhoebo tse ngata tse kang Midea, FSL joalo-joalo. (bafani + balekane)

Bafani ba rona:

Balekane ba rona:

Litlotla tsa khoebo

Ho tloha ha re thehoa, re fetile litifikeiti tse ngata tse nang le matla, litokelo le likhau tsa rona le tsona li tsamaisitse tsoelo-pele ea rona.

Litšebeletso tsa tharollo e le 'ngoe

Joinet e thehiloe ka 2001 mme e fihletse tsoelo-pele e kholo lilemong tse mashome a mabeli tse fetileng. Re na le lisebelisoa tsa rona le feme mme re fana ka letoto la lits'ebeletso tse amanang le tsona, ho kenyeletsoa SMT, DIP, PCBA, ho fafatsa le ho gluing, tlhahlobo e tšepahalang, kopano ea lihlahisoa tse felileng le Tsamaiso ea Tsamaiso ea Boleng.

1.SMT:

Re fa bareki ba rona lits'ebeletso tsa ts'ebetso ea boleng bo holimo ba SMT, re na le lisebelisoa tse 'maloa tsa lebelo le phahameng tsa SMT Fuji NXT II, mohala o mocha ka ho fetesisa oa SMT oa YAMAHA, mochini o kopanyang o ikemetseng oa PCB, plasma cleaner, X-RAY. joalo joalo. Ho feta moo re ts'ehetsa SMT ea likarolo tsa elektroniki tse nepahetseng joalo ka karolo ea 0201 le QFN.

Litšebeletso tsa ts'ebetso ea SMT

● Ho laola tlhahlobo e kenang ea IQC, tlhahlobo ea IPQC, tlhahlobo ea khale ea fektheri ea QQC le mekhoa e meng ea bohlokoa ea tlhahiso.

● Ho hlomelloa ka setsebi sa R&D le sehlopha sa boenjiniere ho kenya litokomane tsa boenjiniere tsa bareki

● Ho beha leihlo ts'ebetso ea tlhahiso ea PMC ho paka ho fana ka nako

● Ho sebelisa k'hothone e sireletsang ea perela ea ESD kapa mekotla e tsitsitseng bakeng sa ho paka ho netefatsa hore lipalangoang li bolokehile

Matla a tlhahiso ea SMT

● Mountable PCB hardboard, PCB softboard(FPC) le ka bobeli

● Sephutheloana se senyenyane ka ho fetisisa se fumanehang 0201CHIP/0.35 PITCH BGA

● Ho nepahala ha ho kenya lisebelisoa tse nyenyane ka ho fetisisa: ± 0.04MM

● Ho nepahala ha ho kenngoa ha IC: ± 0.03MM

● Ho phahamisa boholo ba PCB: L50 * W50MM-L50 * W460MM

● Mounting PCB botenya: 0.3MM-4.5MM

● Impedans 0.3%

2.DIP:

E le karolo ea PCBA, DIP e bua ka likarolo tse kholo tse hlokang li-plug-ins tsa manual ho e-na le ho kenya mochine, 'me e tla ba lihlahisoa tsa ho qetela ka ho hlahisa maqhubu.

Leqhubu la solder le se nang lead le othomathike ka botlalo

● Sistimi ea ts'ebetso ea WINDOWS XP + sistimi ea taolo ea PLC

● Pre-heating zone e amohela moralo oa mekhahlelo e meraro o nang le lebelo le feto-fetohang le moea o chesang o monyane bakeng sa ho futhumatsa hantle le taolo e nepahetseng ea mocheso.

● Li-algorithms tsa PID tsa ho itlhahloba li sebelisoa ho laola mocheso oa tin pakeng tsa ± 1 ° le Tin e ka eketsoa ka bo eona.

● Rekota boemo ba sesebelisoa mme u behe litumello bakeng sa basebelisi ba fapaneng

● Ho sebelisoa li-adhesives, solder paste kapa metsoako ea tsona

● Nako e fokolang ea litheminale tsa likarolo tse chesehang

Tlhahlobo ea AOI inthaneteng

● Ha ho na litlhoko tsa paramente efe kapa efe, patlo e le 'ngoe e bohlale ea lisebelisoa tse fetang 80

● Litlaleho tsa tsamaiso ea SPC li ka hlahisoa

● Ts'ehetso ea boitsebahatso ba khoutu ea bar le lihokelo tsa sistimi ea MES

● Taolo ea boleng ba nako ea sebele

3.PCBA:

E bolela mokhoa oa ho thunya boto ea PCBA le tlhahlobo ea tsela, ea hajoale, voltage, khatello le mora ho etsa bonnete ba hore lihlahisoa tsa ho qetela li sebetsa hantle. Ho latela lintlha tsa liteko tsa bareki, ts'ebetso le ts'ebetso ea liteko ho etsa smelter ea liteko tsa FCT bakeng sa tlhahlobo.

Melao-motheo ea teko

● Ho kopanya lintlha tsa teko ea boto ea PCBA ho theha tsela e feletseng ka benche ea teko ea FCT, 'me joale ho hokahanya k'homphieutha hammoho le ho chesa le ho kenya lenaneo la MCU. Lenaneo la MCU le tšoara liketso tsa basebelisi le ho laola phetoho ea potoloho e haufi. Qetellong, teko eohle ea boto ea PCBA e tla phethoa ka ho shebella motlakase le lintlha tsa morao-rao tsa liteko ka bencheng ea teko ea FCT le ho netefatsa hore na liketso tsa ho kenya le ho tsoa li lumellana le moralo.

PCBA Test Stands

● Lithapa tsa tšepe tsa tšepe li hokahanya lipampiri tsa solder kapa lintlha tsa tlhahlobo tsa boto ea PCB, ha li buletsoe, boleng bo tloaelehileng joalo ka voltage, hona joale bo tla fumanoa ho lekola hore na boleng ba lisebelisoa tsa tlhahlobo bo nepahetse. 'Me litulo tsa rona li hlophisitsoe ho latela boholo ba boto ea PCBA, boemo ba lintlha tsa tekanyo le litekanyetso tse lokelang ho lekoa.

4.Ho fafatsa le ho khoasolla:

Ho fihlela litlhoko tsa lihlahisoa tsa bareki ba rona bakeng sa ts'ebeliso ea tikoloho, re na le lisebelisoa tse tharo tse nang le bopaki bo ikemetseng ba tlhahiso ea ho fafatsa.

Melemo ea ho fafatsa ka mokhoa o itekanetseng

● Ho fafatsa ka letsoho ho tloaelehileng ho ka 'na ha e-ba le litšitiso tse kang ho se tsitse hantle, botenya bo sa lekaneng, bo ka qojoang. ho fafatsa ka boiketsetso ho nang le lebelo le phahameng le ts'epahalo e phahameng.

Melemo ea pente e nang le lintlha tse tharo

● E etselitsoe ka ho khetheha ho sireletsa mapolanka a potoloho kapa lisebelisoa tse ling ho senya. 'Me pente e tla etsa filimi e sireletsang e pepeneneng ka mor'a ho phekola ('mala o ka etsoa ka mokhoa o ikhethileng). 'Me e ka paka lerōle, ho lutla, mongobo, corona joalo-joalo.

Gluing

● Kenya likhomaretsi tsa lipitsa tsa Polyurethane, likhomaretsi tsa pitsa ea silicone, likhomaretsi tsa epoxy resin ka har'a lisebelisoa tse nang le lisebelisoa tsa elektroniki kapa litsela. Ebe e fetoha thepa ea ho kenya thermosetting polymer e nang le thepa e ntle haholo bakeng sa ho kopanya, ho tiisa le ho sireletsa tšireletso. Mme ka nako e ts'oanang re fana ka lits'ebeletso tse ikhethileng.

Mesebetsi ea gluing

● Matlafatsa lisebelisoa tsa elektroniki ka kakaretso ho ntlafatsa khanyetso ea litšisinyeho tsa kantle

● Ntlafatsa ho ts'oaroa ha likarolo tsa kahare le litsela ho ba foromo e nyane

● Qoba ho pepeseha ka ho toba ha likarolo le litsela tsa ho ntlafatsa metsi, mongobo le ho hanyetsa lerōle la sesebelisoa

5.Teko e ka tšeptjoang:

5.Re ka fana ka liteko tse ka tšeptjoang le bareki ba rona ho hlahloba botšepehi le botsitso ba lihlahisoa tsa rona tlas'a maemo a itseng. Ho ea ka litlhoko tsa bareki ba rona, re beha PCBA ea rona kapa lihlahisoa ho maemo a khethehileng a mocheso le mongobo ho sebetsa lihora tse 8 ho isa ho lihora tse 168. Mme tlhahlobo ea rona hangata e kenyelletsa tlhahlobo ea ho theoha, tlhahlobo ea vibrate, tlhahlobo ea sefafatsi sa letsoai joalo-joalo. Re ka boela ra laela tlhahlobo ea motho oa boraro haeba ho hlokahala.

Mehato ea tlhahlobo e tšepahalang:

● Beha liboto tsa tšebetso ka kamoreng ea botsofali ea mocheso o tšoanang

● PCBA e ea sebetsa

● Mocheso oa likamore tsa botsofali o lokela ho behoa ho latela tekanyo e behiloeng

● Ha mocheso oa likamore tsa botsofali o tsitsitse, PCBA e tsoela pele ho sebetsa lihora tse 8 ho isa ho lihora tse 168 tlas'a mocheso o behiloeng.

● Tsoela pele ho shebella le ho rekota data

6.Finished lihlahisoa kopano:

re boetse re fana ka litšebeletso tsa kopano ea lihlahisoa tse felileng. Ka mor'a ho bokella boto ea PCBA, matlo le lithapo hammoho, sehlahisoa se feletseng sa sehlahisoa se felile bakeng sa tšebeliso ea ho qetela. 'Me re fetile ISO9001:2015Quality Management System le LATF16949 Automotive Electronics Quality Certification. 'Me nakong ea ts'ebetso ea PCBA, re kenya ts'ebetsong litekanyetso tsa indasteri ea SOP ka tieo, AOI, ICT, FCT, QC cheke, lisampole tsa QA inthaneteng, sampole ea OBA joalo-joalo.

Melemo ea kopano ea lihlahisoa tse felileng

● Ho bala ka nako e nepahetseng lintho tse nang le phoso nakong ea kopano

● QC 100% tlhahlobo e felletseng, sampole QA ho latela maikutlo a bareki kapa maemo a AQL

● Lefapha la boleng le etsa tlhahlobo ea OBA kantle ho lebokose

● R&D bokhoni

● Bokhoni bo bocha ba kenyelletso ea theknoloji: kenyelletso ea nts'etsopele ea tharollo ea theknoloji le molekane oa chip

● Litšebeletso tse felletseng bakeng sa lihlahisoa tse ncha: POC - EVT - DVT - PVT - MP

● Tlhahlobo ea ho hloleha: Ho hokahanya DFME le PFMEA hammoho ho ntlafatsa boleng ba sehlahisoa, ho fokotsa litšenyehelo le ho khutsufatsa nako ea ntlafatso.

● R&Sehlopha sa D: R&Litho tsa sehlopha sa D kaofela li fumane mangolo ho tsoa liunivesithing tsa naha mme boholo ba tsona li bile indastering ea IOT ka lilemo tse mashome.

● Patents: Ka lilemo tse ngata re ’nile ra fuoa litokelo tse ngata

● Thepa ea Setsebi

Lisebelisoa tsa tlhahiso:

joalo ka k'hamphani e nang le feme ea rona, re na le letoto la lisebelisoa tsa tlhahiso, joalo ka: mochini oa likhoutu o sa sebetseng + mochini oa boarding o ikemetseng + mochini o nang le lebelo le akaretsang oa FuJiXP243E+ FuJiNXT IIC ea lebelo le holimo. + Mechini ea ho seha e itšebetsang ka botlalo + ICT

Mochini oa ho palama o itirisang ka botlalo

Mechini ea ho seha ka ho feletseng

Mechini e phahameng ea lebelo le akaretsang ea FuJiXP243E

ICT

Igh-speed bonder FuJiNXT IIC

Mochini oa khouto o kantle ho marang-rang

Lisebelisoa tsa ho hlahloba:

ho netefatsa ts'ebetso le ts'ebetso ea lihlahisoa tsa rona, Joinet e hlahisitse lisebelisoa tse ngata tse tsoetseng pele tsa tlhahlobo ho fihlela litlhoko tsa rona, joalo ka ESD electrostatic tester +Leakage Tester +Pressure resistance tester +Abrasion resistance tester + Wireless connection tester. + UV Botsofali Tester

Abrasion resistance tester

ESD electrostatic tester

Leakage Tester

Mohlahlobi oa ho hanyetsa khatello

UV botsofali Tester

Teko ea khokahano e se nang mohala

Litšenyehelo

Sistimi ea barekisi e thehiloeng hantle + Ts'ehetso ea ntlafatso ea software ka theko e tlase

Lipalangoang

Sebaka sa Guangdong-Hong Kong-Macao Greater Bay Area+Sea, lipalangoang tsa lefatše le tsa moea.

Phano

T+3 e tsamaisoa ka nako+ lihora tse 7*12 inthaneteng+ Ntlafatso e tsoelang pele ea PDCA

Ikopanye le rona kapa u re etele

Re mema bareki ho sebelisana le rona ho theha bokamoso bo betere hammoho.

Kopanya tsohle, hokela lefatše.

Hore na o hloka mojule oa tloaelo oa IoT, lits'ebeletso tsa kopanyo ea moralo kapa lits'ebeletso tse felletseng tsa nts'etsopele ea sehlahisoa, moetsi oa sesebelisoa sa Joinet IoT o tla lula a sebelisa boiphihlelo ba ka tlung ho fihlela mehopolo ea moralo oa bareki le litlhoko tse ikhethang tsa ts'ebetso.

Lihokelo tsa Shortcut

Lihlahisoa

Li-module tsa Bluetooth

Li-tag tsa elektroniki&Label

Microwave Radar Modules

Li-module tsa ho Tseba Lentsoe la Offline

Ikopanye le rona

Motho eo ho ka kopanang le eena: Sylvia Sun

Mohala: +86 199 2771 4732

WhatsApp: +86 199 2771 4732

Email:sylvia@joinetmodule.com

Eketsa:

Foshan City, Setereke sa Nanhai, Seterata sa Guicheng, No. 31 East Jihua Road, Tian An Center, Block 6, Room 304, Foshan City, Runhong Jianji Building Materials Co.

Iteanye le rona